21st QUENCH Workshop, 27 - 29 October 2015
An important accident management measure for controlling severe accident transients in light water reactors (LWRs) is the injection of water to cool the degrading core. Flooding of the overheated core, which causes quenching of the fuel rods, is considered a worst-case scenario regarding hydrogen generation rates which should not exceed safety-relevant critical values. Before the water succeeds in cooling the uncovered core, there can be an enhanced oxidation of the Zircaloy cladding that in turn causes a sharp increase in temperature, hydrogen production, and fission product release. The investigation of the complex physico-chemical processes during quenching and their mutual influence is the main objective of the QUENCH program at KIT.
In most of the code systems describing severe fuel damage the quench phenomena are modeled in a simplified empirical manner; the hydrogen source term during quenching is mostly underestimated. The QUENCH program on reflood of an overheated core and corresponding topics is running at KIT, including large-scale bundle tests, various kinds of separate-effects tests, model development and code application.
During the QUENCH Workshop recent experimental results will be presented and progress in modeling of the relevant phenomena will be discussed. Furthermore, contributions on materials interactions during LOCA and the early phase of severe accidents in nuclear reactors including spent fuel pools as well on the coolability of the core including debris beds are welcome. As during the last two workshops, we plan to organize a special session on ATF with the focus on accident tolerant claddings.